====== ssh Quick Reference ======
This is just some common tricks to use for ssh
===== Passwordless Logins =====
Sometimes, you need to be able to have an automated process log in to a //Target// machine from a //Source// machine. In most cases, this is done as the root user. This decreases security somewhat since if your //Source// machine is compromised, they can gain access to the //Target// with no problem (assuming they compromise the root account). However, automated processes require this.
The best way to do it is to use the //forced-command// parameter in //Target//'s sshd config file (/etc/ssh/sshd_config) for the root account, then create entries in the /root/.ssh/authorized_keys file. However, there are some times when you strictly need full access for a short period of time. I'll cover both.
First, on //Target//, create a public key pair. First, look if you already have a public key pair as we might not want to overwrite it.
ls /root/.ssh
If that does not have id_rsa and id_rsa.pub, or if you want to trash those, then we're good. If they exist, you can either use 'dsa' (an alternative) or temporarily move them out of the way (or delete, if you don't need them). Issue the following command, as root, and press at every question (including the passphrase). Change //rsa// to //dsa// if you want to use dsa.
ssh-keygen -t rsa -b 4096
This creates a file, /root/.ssh/id_rsa.pub, which is the public key for /root/.ssh/id_rsa (which has an empty passphrase). Somehow, get the contents of id_rsa.pub onto //Target//. It is a simple text file, so copy/paste is fine.
On //Target//, do the following:
mkdir -p /root/.ssh
joe /root/.ssh/authorized_keys
# place contents of id_rsa.pub on a separate line, then exit the editor
chown -fR root:root /root/.ssh
chmod 700 /root/.ssh
chmod 600 /root/.ssh/authorized_keys
From //Source//'s root account, you should now be able to ssh to Target and not have a password requested.
==== Limit to a single program ====
A more secure way to do this is to limit the command available. In this case, edit //Target//'s /root/.ssh/authorized_key and add '//command="/some/command/here", '// to the beginning of a line which authorizes access. The space is very important after the comma. An example is:
command="/opt/bin/limitaccess", ssh-rsa AAAA...341tQ== root@dd-app-021
Upon login, /opt/bin/limitaccess will be called with the full parameters. If that script returns success, the command is allowed. If it does not, login is rejected. A sample script follows:
#! /usr/bin/evn perl
use warnings;
use strict;
# get IP address
my $realIP = $ENV{'SSH_CLIENT'};
$realIP =~ m/^([\d.]+)/;
$realIP = $1;
# and hostname
my ($hostname,$temp) = split( ' ', $ENV{'SSH_ORIGINAL_COMMAND'});
# if $temp exists, it is the IP
$realIP = $temp if $temp;
die "You must send hostname with command\n" unless $hostname;
# do whatever you want here.
# look through $ENV to see what you can access
my $OK = &checkPermission();
die unless $OK;
1; # we made it here, so they can issue the command
===== Port Forwarding =====
ssh has the ability to forward an IP:port //as seen by the local machine// to an IP:port //as seen by the remote machine//. The most common occurrence of this would be to be able to access an internal web site when you ssh into a remote machine that is on that internal network.
The syntax uses the **-L** parameter to ssh, in the form
ssh -L localip:localport:remoteip:remoteport something
Remember, the local port is as seen by the local machine, and the remote ip/port is as seen by the remote machine. Let's use an example where we want to hit an internal web site where we have remote ssh capabilities. We can log into the remote server as
ssh username@joe.example.org
The internal IP of joe.example.org is 192.168.1.5, and we want to hit an HTTPS (port 443) web site at 192.168.1.6 (same subnet). We can not use ports under 1024 unless we are root, so we'll use port 8080 on our local machine (localhost) to get to that. The following command shows the example.
ssh -L localhost:8080:192.168.1.6:443 username@joe.example.org
# or, you can leave off the first IP and localhost is assumed
ssh -L 8080:192.168.1.6:443 username@joe.example.org
When this connection is made, any traffic going to localhost:8080 will be forwarded //over the ssh connection// to 192.168.1.6 on port 443. So, we can open our web browser on our local machine and put in the URL:
https://localhost:8080
and see the normally inaccessible web site on the remote network.
**Note**: You should not try to use a port that is already being used on your machine. So, for example, if you have a web server running on your local machine at port 8080, ssh can get very confused. In that case, you would want to use another port. You can use any unused port between 1025 and 65535 (don't know about the first and last ones there).
===== Relay Port Forwarding =====
I don't know the actual term for this, but we can forward a port to some machine, then forward that port to still another one. In this case, we have jane.example1.org, which we can get to. We also have john.example2.org which we can not get to unless we are logged into jane. We need to get to a Windows RDP server which john.example2.org can get to (port 3389).
ssh -L localhost:3389:localhost:3389 username@jane.example1.org
# we make the connection to jane and get a command prompt
ssh -L localhost:3389:192.168.1.10:3389 username@john.example2.org
# we are now on john, and 3389 from jane is forwarded to windows
# server at 192.168.1.10
In this case, we have said //any traffic for port 3389 on my local machine is forwarded to localhost port 3389 on jane// in the first command.
The second ssh command says //any traffic for port 3389 on my local machine (jane) is forwarded to port 3389 on the machine on my same subnet at 192.168.1.10 on port 3389//
You can now open an rdp client on your local machine to connect to localhost:3389. Any traffic for that will be forwarded to jane, which will then forward to john, who will then forward to 192.168.1.10.