Install and enable the upsmon driver from nut

# install the full nut package
pkg install nut
# Tell sysrc to enable upsmon
sysrc nut_upsmon_enable="YES"
# verify you have a connection to the master
upsc ups1@192.168.1.100

Configure two files, both in /usr/local/etc/nut

nut.conf

# this will not do anything except communicate with the master
# to get the status
MODE=netclient

upsmon.conf

# standard default values for monitoring
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/poweroff"
POLLFREQ 5
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 15
POWERDOWNFLAG "/etc/killpower"
OFFDURATION 30
RBWARNTIME 43200
NOCOMMWARNTIME 300
FINALDELAY 5
# this is what we're monitoring
MONITOR ups1@192.168.1.100:3493 1 upsmon mypassword slave

Start the service

service nut_upsmon start

• https://dan.langille.org/2020/09/07/monitoring-your-ups-using-nut-on-freebsd/